Gland Packing

It is a flexible and high strength braided packing which is made of an innovative expanded pure graphite yarn whit Inconel wire reinforcement. The combination of other braided packing installed with the excellent sealing capabilities of expanded graphite makes JM-P223 the most effective sealing component, especially in the presence of high pressure. It can be used to seal hot water, high temperature and pressure steam, teat transfer fluid, hydrogen gas, ammonia, organic, solvents, hydrocarbons, cryogenic liquides, etc., except fewer strong oxidizer. It also is a unique and univers al sealing packing.  Gland Packing  

ApplicationsBraided with PTFE yarn and blended with silicone rubber in central position, having excellent compression compensation power, The applications are the same as HL-8032  Silicone

Applications valve packing and pumpExpanded graphite ring process.- Temperature : 1000°C-pH : 0 - 14- Size : 0.4 t x 13w x 15m0.4 t x 25 w x 15 m0.4 t x 50 w x 15 m   Gland Packing Graphite 

ApplicationsIt is braided packing made of PTFE yarns and the reinforced corner yarn of Aramid fiber. This structure enhances the lubricability of Aramid fiber and reinforces the strength of the pure PTFE packing. This special combination packing play a very important role in the sealing of high pressure piston pump.  Gland Packing

ApplicationsIt is braided packing made of pure PTFE thin yarns fiber, almost complete chemical inertia, dimensional stability, low friction coefficient to compression and excellent Resistance to compression are qualities classifying this packing among the best once available in the industrial field.It is suitable for all the chemical compounds (excepting cast alkaline metals and the gaseous fluorine), alternative and rotary motions shafts operation at low peripheral speed, rods, pistons, valve steam, etc.  Gland Packing 

The carbonized fiber yarn is treatded with graphite particles, and then is braided to from packing. Its surface is coated with an high -temperature-proof lubricant. It is able to bear high temerature and pressure, and helps prevent abrasion and volume loss to the packing rings. It can also help to minimize the effects of electrolytic pitting of the valve stem. Gland Packing

Ramie PTFE Packing Features: Ramie fiber is very soft and easy to be impregnated.It turn to be with higher strength, better corrision and attrition resistance after impregnation of PTFE dispersion. The packing made of ramie fiber has very slim attrition to the shaft, so it's an ideal material to be used in sea water ,clearn water with low temperature, low speed, and equipment with the media of food, oil, and fruit juicy,ect. Application conditions: 1)Working temperature: -40 ~ +140 centigrade 2) Max. working pressure:3 Mpa(rotary pump) Max. working pressure:6Mpa(reciprocating pump) Max. working pressure:15Mpa(valve) 3)PH value:4-11 4)Linear speed: 8M/S(rotary pump) Linear speed: 1.5M/S(reciprocating pump) Linear speed: 1.5M/S(valve) 5) Cross Section: 1/8" ~ 3"(3X3-75X75mm) 6) Density: 1.25 ~ 1.35g/cc Gland Packing  Gland Packing

Features:Ramie graphite packing is made from ramie fiber which is treated with special process and high-temperature lubricant. It's an ideal gland packing to be used in sealing of ash-removing pump, sediment pump,boosterpump, and water feeding pump of power station,as well as high perssure slurry pump of oil field and fluid pumps of mine.Application conditions:     1)Working temperature: -40 ~ +140 centigrade     2) Max. working pressure:3 Mpa(rotary pump)         Max. working pressure:5Mpa(reciprocating pump)         Max. working pressure:12Mpa(valve)     3)PH value:5-12     4) Linear speed: 10M/S(rotary pump)         Linear speed: 2M/S(reciprocating pump)         Linear speed: 2M/S(valve)      5) Cross Section: 1/8" ~ 3"(3X3-75X75mm)      6) Density: 1.30 ~ 1.40g/cc  Gland Packing

Features:     Graphite gland packing with carbon fiber corners braided from expanded graphite yarns, which can withstand high temperatures and carbon fiber with superior corrosion resistance. The carbon fiber in the four corners provide a higher resistance to extrusion and friction. This packing can effectively avoid leakage, especially suitable in applications stantions powder valve with high temperature and pressure.    application conditions:        1) Working temperature: - 200 ~ 650 (STEAM)                                                 -200 ~ 565 (MOOD)         2) Max. working pressure: 35MPa           (Can only be used in valves and other static sealing condition)         3) PH value: 0-14        4) Linear speed: 0-2M / S (valve)        5) Cross Section: 1/4 "~ 1-1 / 2" (6X6-38X38mm)        6) Density: 1:10 ~ 1.20g / cc  Gland Packing

ApplicationsThe edge of the packing is reinforced with filled P.T.F.E fiber mixed with graphite P.T.F.E fiber for better lubrication especially at higher speeds. It is suitable for strong corrosive fieids, especially for pumps using strong purified water such as liqueur and alcohol and as chemical bleaching agent is paper companies, soaking facilities and for machines with injection pump or absorption eliminator Gland Packing